FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Bay

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

1

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Bay

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the Bay. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Inlcudes features such as bays, inlets and coves. This feature type will be used for an indentation of the sea into the land and for the equivalent features in inland waterbodies.

The bay location will be positioned at a point in the sea or waterbody in the middle of the indentation ( or centre of the bay).

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'Port Phillip Bay'. A locality of the same code and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

Place Name, Sea, Waterbodies (Feature Dataset), Map Indexes, Locations (Feature Class)

Section 3 chapters 5.3, 5.11.1, 5.11.2

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Beach

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

2

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Beach

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the Beach. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Only named beaches on the base material/digital data and authorised revision source material are to be included.

The beach location will be coincident with the Shoreline or Waterbodyboundaries (feature class) at the approximate centre of the beach.

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'Ten Mile Beach'. A locality of the same code and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

General - All Scales

The names of all beaches on the previous edition map are to be included except where they are adjacent to a populated place with the same root-name. ie. 'Bondi Beach' would not appear if there is an adjacent populated place named 'Bondi' on the map.

Built Up Area,Place Name, Populated Place, Shoreline, WaterbodyBoundaries (feature class), Mainland, Island, Sand, Sand Dunes.

Section 3 chapters 5.3, 5.11.1, 5.11.2

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Cape

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

3

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Cape

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the Cape. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Includes features such as capes, headlands, heads and points. This code will be used for a section of land protruding into the sea and for the equivalent features in inland waterbodies.

Cape features will be positioned at a point on the land representative of the location of the cape.

General - All Scales

Capes must not overlap;
Sea, Lake (Perennial), Watercourse Area (Perennial).

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'Cape York Peninsula'. A locality of the same code and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

Mainland, Island, Waterbodies (feature dataset).

Section 3 chapters 5.3, 5.11.1, 5.11.2 and 6.6

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

ANNOTATION CLASS IDENTIFER (ANNOTATIONCLASSID) [Integer;Yes;0;10;0;Pop_Aut] This is the Annotation Class Identifier which is used to define annotation subtypes.

The following annotation classes exist in FrameworkAnno;
Arial10ptCenter
Arial10ptItalicCenter
Arial12ptCenter
Arial12ptItalicCenter
Arial14ptCenter
Arial14ptItalicCenter
Arial18ptCenter
Arial18ptItalicCenter
Arial20ptItalicCenter
Arial24ptCenter
Arial24ptItalicCenter
Arial6ptCenter
Arial6ptItalicCenter
Arial6ptItalicLeft
Arial6ptItalicRight
Arial7ptCenter
Arial8ptCenter
Arial8ptItalicCenter
Arial8ptItalicLeft
Arial8ptItalicRight
Arial9ptBoldCenter
Arial9ptBoldLeft
ArialNarrow10ptCenter
ArialNarrow10ptItalicCenter
ArialNarrow12ptItalicCenter
ArialNarrow14ptItalicCenter
ArialNarrow16ptItalicCenter
ArialNarrow5ptCenter
ArialNarrow6ptItalicCenter
ArialNarrow6ptItalicLeft
ArialNarrow6ptItalicRight
ArialNarrow7ptCenter
ArialNarrow7ptItalicCenter
ArialNarrow8ptCenter
ArialNarrow8ptItalicCenter
ArialNarrow8ptLeft
ArialNarrow8ptRight
PalatinoLinotype6ptLeft
PalatinoLinotype6ptRight

FEATURE (FEATURE) [String;Yes;32;0;0;Pop_Req] The code which identifies the class of topographic feature represented by the annotation. This field must be a legitimate feature class name.

Acceptable Domain Entries from dm_FrameworkFCs;
FrameworkBoundaries
Islands
LargeAreaFeatures
Locations
Mainlands
Seas

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

No feature type field exists for this annotation feature class. The feature type has only been included throughout the specifcation documentation for ease of reference.

Only Annotation associated with, or derived from, entities in feature classes grouped within the Framework feature dataset should exist within the FrameworkAnno feature class.

Wherever possible annotation should be stored using the subclasses indicated under AnnotationClassID. Annotation stored as inline text should be kept to a minimum.

Type for large polygons and long linear features may be held in an annotation feature for each word to allow for spacing and differences in orientation, see Section 2 chapter 4.

Annotation should not contain any HTML tags within the blob element, nor should it contain any special characters.

Editing and placement of Annotation should be conducted in the appropriate MGA 1994 zone to ensure the spatial position of type on the map face can be correctly represented.

Section 2 chapter 5, 9, 10

NTMS 100K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Gorge

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

4

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Gorge

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the Gorge. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

The locality point will be placed approximately half way along the length of the gorge. The locality point will be coincident with a vertice on the main watercourse in the gorge, where there is a watercourse. Where there is no watercourse the locality point will be placed central to the gorge.

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'Ironbark Gorge'. A locality of the same code and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

Contours, Hypsometric Areas, Horizontal control point, Spot elevation, Watercourse, Watercourse Area

Section 3 chapters 5.3, 5.11.1, 5.11.2 and 6.6

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Island

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the island. This item should be populated where name is known.

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

At 25K and 100K the acceptable Domain Entries from dm_IslandState are;
AUSTRALIAN CAPITAL TERRITORY
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
NOT APPLICABLE
PAPUA NEW GUINEA
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

At 250K the following are the acceptable entries;
N/A
ACT
JBT
NSW
NT
PNG
QLD
SA
TAS
VIC
WA

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

1:25 000

Size and any other selection criteria apply to all feature occurrences.

1:100 000

Size and any other selection criteria apply to all feature occurrences.

1:250 000

Size and any other selection criteria apply to new feature occurrences. All feature occurrences existing in the TOPO250K NTDB will be retained unless there is clear evidence they no longer exist.


The following is a listing of the acronyms used in the State field and their associated meanings:
Acronym: Meaning
N/A Not Applicable
ACT Australian Capital Territory
JBT Jervis Bay Territory
NSW New South Wales
NT Northern Territory
PNG Papua New Guinea (Foreign Territory)
QLD Queensland
SA South Australia
TAS Tasmania
VIC Victoria
WA Western Australia

General - All Scales

This feature refers to offshore islands only.

Where a group of Islands have the same name and state values, and are close but not adjacent to each other, they should be merged to form a multi-part polygon.

New features smaller than the minimum size will be shown as Offshore Rocks with a RELATIONSHIP of Bare.

General - All Scales

Islands are bounded by Junction, Shoreline and Limit of Data

Islands cannot overlap each other or other polygons in the Framework Dataset.

General - All Scales

Islands may also be bounded by Sea wall features.

General - All Scales

The island name will appear on the map, where known.

Junction, Sea Wall, Limit of Data , Shoreline, WaterbodyBoundaries (Feature Class), Large Area Feature

Section 3 chapters 5.16, 5.17, 5.18 and 6.9

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Junction

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

1

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Junction

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

FrameworkBoundaries (feature class) bound all polygons in the Framework Dataset except Large Area Features. For more information on the use of Junction See Section 3 Chapter 5.17.

Junctions will be included in the Framework Dataset where they form part of the coastline , and will replace the equivalent section of Shoreline. They will also appear in the Framework Dataset where they separate two Sea feature types.

Junctions within the framework dataset are generally 3 point lines except where their separate two sea polygons or where more vertices are needed to close the polygon and maintain the correct polygon closing line shape. See Section 3 Chapter 6.9.

Junctions are only used to separate water polygons where there is no physical feature already doing so. They are most commonly used to separate water polygon features with different names.

General - All Scales

Junctions must be bordered by waterbodies in the Waterbodies Dataset or by the sea on one side in the Framework Dataset.

Canal Area, Canal Line, Connector, Connector Discontinuity, Connector Standard, Depression Contour, Interpolated Contour, Standard Contour, Island, Lake, Land subject to inundation, Large Area Feature, Mainland, Flood Irrigation Storage, Town Rural Storage, Sea, Saline coastal flat, Swamp and Watercourse, Watercourse Area

Section 3 chapters 5.11.1, 5.11.3, 5.17, 6.2 and 6.9

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Large Area Feature

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the significant region. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0 - non printing

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Revision of Large Area Features will only be conducted when specifically directed by GEOSCIENCE AUSTRALIA. The only exception to this rule is when the shoreline is spatially adjusted, in which case Large Areas Features will be also be adjusted to maintain consistency.

General - All Scales

Large Area Features cannot overlap;
Sea

Where a Large Area Feature edge (feature class polygon) is within 50 metres of and runs alongside the Shoreline they must be coincident with each other.

A Place Name (feature type) should not duplicate the representation of features already defined in the Large Area Features feature class.

General - All Scales

When a Large Area Feature occupies a spatial extent greater than or equal to 5% of the applicable map index (including the bleed edges), it will be labeled with its name. Annotation representing a Large Area Features will be placed within its polygon boundary.

FrameworkBoundaries, Mainland, Island, Sea

Section 3 chapter 6.11, 5.17, 5.18

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Limit Of Data

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

4

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

LimitOfData

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

The limit of Data feature will bound or complete all polygon features whose extent can not be fully determined by source material or where the associated polygon feature is adjacent to the edge of the database.For more information on the use of Limit Of Data Line See Section 3 Chapter 5.17.

Island, Mainland, Sea, SeriesIndex (feature dataset), Limit Of Data (framework)

Section 1 chapters 3.4 and 3.7
Section 3 chapters 5.11.2, 5.12, 5.17 and 6.1

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Mainland

STATE/TERRITORY (STATE) [String;Yes(No);30;0;0;Pop_Req] Australian/Foreign State or Territory identifier code;

At 25K and 100K the acceptable Domain Entries from dm_MainlandState are;
AUSTRALIAN CAPITAL TERRITORY
JERVIS BAY TERRITORY
NEW SOUTH WALES
NORTHERN TERRITORY
QUEENSLAND
SOUTH AUSTRALIA
TASMANIA
VICTORIA
WESTERN AUSTRALIA

At 250K the following are the acceptable entries;
ACT
JBT
NSW
NT
QLD
SA
TAS
VIC
WA

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

1:250 000

The following is a listing of the acronyms used in the State field and their associated meanings:
Acronym: Meaning
ACT : Australian Capital Territory
JBT : Jervis Bay Territory
NSW :New South Wales
NT :Northern Territory
QLD :Queensland
SA :South Australia
TAS :Tasmania
VIC : Victoria
WA :Western Australia

General - All Scales

The Mainland feature will be bounded by a combination of Shoreline, State border and Junction features.

Mainland excludes Sea areas, and Islands surrounded by the Sea.

General - All Scales

Mainland cannot overlap MarineAreas except Foreshore flats in estuarine areas (see Foreshore flat).

Foreshore Flat, Junction, Large Area Feature, Sea wall, State border, Shoreline, WaterbodyBoundaries (Feature Class) , Limit of Data

Section 1 chapter 3.1
Section 3 chapter 5.17, 5.18 and 6.9

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Mountain

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

5

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Mountain

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the Mountain. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0 - non printing
52 - limited use, see Inter Feature Relationship Rules External for cases where this symbol is required.

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Includes features such as mountains, peaks and hills: The locality point will be positioned exactly as shown on the base material/digital data. If a positioning point is not shown on the map then other compilations or large scale maps may be used to position the locality feature at its true planimetric position.

Mountains will be named. See Section 2 chapter 5.10 for naming conventions.

If multiple peaks are confirmed to be associated with the same name, then each individual peak should be captured as a Mountain and attributed accordingly.

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'The Three Brothers'. A locality of the same code and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

If a Mountain feature appears on the latest previous edition map with a name and spot identifier only and a matching spot elevation does not exist then the Mountain feature type will have a symbol code of 52, otherwise a symbol code of 0.

Where there is a known elevation for the Mountain feature it will be cloned as a Spot elevation (see Spot elevation). Should the spot elevation need to be moved (see Section 3 chapter 6.6) the Mountain will be moved with it.

General - All Scales

Mountains, peaks & hills will be named. See Section 2 chapter 5.10 for naming conventions.

Horizontal Control Point, Spot Elevation, Contours (feature class), Hypsometric Areas.

Section 3 chapters 5.3, 5.11.1, 5.11.2 and 6.6

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Pass

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

6

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Pass

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the pass. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Named passes on the road network will be included. Any other named passes included on the latest previous edition map or base material/digital data will be included. The locality point will be at the highest point on the pass. Where a pass is traversed by a road feature, the point will be coincident with a vertice on the road. If necessary, a vertice will be created on the road coincident with the highest point on the road.

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'Hamilton Gap'. A locality of the same code and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

Horizontal control point, Road, Spot elevation, Contour (feature class), Hypsometric Areas.

Section 3 chapters 5.3, 5.11.1, 5.11.2 and 6.6

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Place Name

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

9

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

PlaceName

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name given to the place. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0 - non printing
52 - limited use, see geodatabase rules & Inter Feature Relationship Rules External for cases where this symbol is required.
420 - limited use, see geodatabase rules & Inter Feature Relationship Rules External for cases where this symbol is required.

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

1:250 000

Where a Place Name point has previously been captured to represent a Large Area Feature (in the Framework Feature Dataset), it should not be retained within the NTDB.

Where a lookout can be confirmed as having an associated tower structure in the base material/digital data or revision material it will be represented as a 'Vertical Obstruction'. Otherwise where the lookout is named, it will be represented as a Place name (small feature with an identifiable location).

General - All Scales

This category will be used to show localities that do not fall in any other category.

The Locality point for area features, not associated with a Large Area Feature (Feature Type) in the Framework Dataset, will be located where the name was located in the base material/digital data or where text was placed on the latest previous edition map.

Text & the locality point for Indigenous Lands shown on Appendix O will be placed within the limits of the area. If the area on Appendix O occupies less than 20% of the area of the map (defined by the applicable Map Index) it will not be shown.

Suburb names included on the latest previous edition map and confirmed on the authorised revision source material for suburb names will be included as place names.

Indigenous sacred sites will not be named as sacred sites on the map even if named on a previous edition map, but the feature may be a lake, pool or waterhole in which case the appropriate map symbol and hydrological name will be used.

Small features with an identifiable location that are not represented by another feature class will be represented using symbol 52 (e.g. historical markers, rocks, etc).

'Other Waters' indicated on Appendix E will not be shown as Place Names.

General - All Scales

A Place Name (feature type) should not duplicate the representation of features already defined in the Large Area Features feature class.

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'GREAT DIVIDING RANGE'. A Location of the same feature type and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

Places with a population of less than 200 and a Built-up area not large enough to be shown as a polygon will be positioned coincident with a vertice or node on the road network. These places will have a symbol of 420. Note: symbol 420 will only be used where the place name is associated with a small built-up area.

General - All Scales

Where symbol 420 is used, the symbol will mask all other detail.

Building Area, Building Point, Built Up Area, Homestead, Kilometric distance marker, Large Area Feature, Populated Place, Railway Station, Sea.

Section 1 chapters 3.8.1
Section 2 chapter 5.3
Section 3 chapters 5.3, 5.11.1, 5.11.2 and 6.5
Appendix E

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Road Junction

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

7

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

RoadJunction

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the Road Junction. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Only named road junctions are included.

General - All Scales

The position of the location will be coincident with the node of the road intersection.

Kilometric distance marker, Road.

Section 3 chapters 5.3, 5.11.1, 5.11.2

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Sea

OCEAN NAME (OCEANNAME) [String;Yes;20;0;0;Pop_Req] Ocean Name of represented area. (See Appendix E.)

Acceptable Domain Entries from dm_OceanNames at 25K and 100K as well as acceptable entries for the 250K field;
INDIAN OCEAN
SOUTH PACIFIC OCEAN
SOUTHERN OCEAN

SEA NAME (SEANAME) [String;Yes;12;0;0;Pop_Wk] Sea Name of represented area. (See Appendix E.)

Acceptable Domain Entries from dm_SeaNames at 25K and 100K as well as acceptable entries for the 250K field;
ARAFURA SEA
CORAL SEA
TASMAN SEA
TIMOR SEA

OTHER WATER NAME (OTHERWATERNAME) [String;Yes;22;0;0;Pop_Wk] Other Waters Name of represented area. (See Appendix E)

Acceptable Domain Entries from dm_OtherWaterNames at 25K and 100K as well as acceptable entries for the 250K field;
BASS STRAIT
GREAT AUSTRALIAN BIGHT
GREAT BARRIER REEF
GULF OF CARPENTARIA
GULF OF PAPUA
JOSEPH BONAPARTE GULF
TORRES STRAIT

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

10

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

The boundaries and names of Seas will be as defined by Appendix E - 'Limits of Oceans and Seas'.

The sea feature type will be used for seas, oceans and other waters as defined on Appendix E.

General - All Scales

The boundary between two seas/oceans/other waters will be shown by a junction feature.

Seas will be bounded by Junction, Shoreline and Limit of Data features.

Sea cannot overlap other polygons in the Framework Dataset .

General - All Scales

Sea may also be partially bounded by Sea wall features.

1:100 000

Where space permits, areas of sea will include the note:
'CAUTION: THIS MAP IS NOT TO BE USED
FOR MARITIME NAVIGATION PURPOSES
Refer to the appropriate hydrographic chart for depth information'
The note will be in black, on three lines broken as above and centre justified. The first two lines will be AN 10 point all caps and the third line will be AN 5 point caps and lower case.

1:250 000

Where space permits, areas of sea will include the note:
'CAUTION: THIS MAP IS NOT TO BE USED
FOR MARITIME NAVIGATION PURPOSES
Refer to the appropriate hydrographic chart for depth information'
The note will be in black, on three lines broken as above and centre justified. The first two lines will be ZC 10 point all caps and the third line will be ZC 5 point caps and lower case.

General - All Scales

The names of seas and oceans and other waters will be shown.

Annotation, Junction, Large Area Feature, Limit of Data, Sea wall, Shoreline, WaterbodyBoundaries (Feature Class)

Section 1 chapter 3.1
Section 2 chapter 5.3
Section 3 chapter 5.17, 5.18 and 6.9
Appendix E

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Shoreline

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

2

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Shoreline

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

94
0 - Shoreline under cliff (non printing line)

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

When bounding sea and estuarine areas, the line is indicative of the position of mean high water. The exception is in Mangroves, where the line is indicative of the position of the seaward side of the mangroves.

The coastline of both the mainland and islands is defined by a combination of shoreline and junction. For more information on when junction should be used in precedence to shoreline, see the junction feature type for the framework dataset.

General - All Scales

FrameworkBoundaries (feature class) bound all polygons in the Framework Dataset except Large Area Features. For more information on the use of Shoreline See Section 3 Chapter 5.17.

1:250 000

WaterbodyBoundaries bounding saline coastal flats will be coincident with the Shoreline in the framework feature dataset where the saline costal flat abuts the sea.

Mangrove (polygon edge) will be coincident with the Shoreline in the framework feature dataset where the mangrove abuts the sea.

Built Up Area, Cemetery Area, RecreationAreas (Feature Class), Canal Area, Canal Line, Cliff, Connector Discontinuity, Connector Standard, Depression Contour, Interpolated Contour, Standard Contour, Island, Lake, Land subject to inundation, Large Area Feature, Mainland, Marine swamp, Foreshore Flat, Marine Hazard Areas (Feature Class), Prohibited Area Boundary Line, Rapid Area, Rapid Line, Reserve Boundary Line, Flood Irrigation Storage, Town Rural Storage, Saline coastal flat, Salt evaporator, Sea, Aquaculture Area, Settling Pond, Swamp, Orchard, Plantation, Rainforest, Forest Or Shrub, Mangrove and Watercourse, Watercourse Area, Junction

Section 2 chapter 2.2.3
Section 3 chapters 5.11.1, 5.11.2, 5.17, 6.2 and 6.9

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

State Border

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

3

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

StateBorder

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

80
0 - non printing

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

State Borders which do not follow physical features will be imported from the Geoscience Australia GEODATA 100K Coast Product. State borders which follow physical features will be coincident with those features.

Where a state border coincides with a lock symbol it is logical that the border symbol should be broken and the lock symbol shown. In such circumstances, the state border symbol may be symbolised to symbol number '0' non-printing value.

General - All Scales

FrameworkBoundaries (feature class) bound all polygons in the Framework Dataset except Large Area Features. For more information on the use of State Border See Section 3 Chapter 5.17.

State borders cannot overlap Sea.

General - All Scales

State borders will be labelled with State names (See Section 2, 4.6)

State borders will be masked where black type unavoidably overprints the feature. The break measurement will be 0.2 mm on either side of the type where it crosses the feature. (Note: the feature will be masked only on the map and will be complete in the data.)

International Boundary , Mainland

Section 3 chapters 5.11.2, 5.17and 6.8

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Waterbody Island

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

8

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

WaterbodyIsland

NAME (NAME) [String;Yes;60;0;0;Pop_Dep]

The name of the Waterbody Island. This item must be populated.

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

0

FEATURE WIDTH (FEATUREWIDTH) [Double;Yes;0;8;4;Pop_Dep]

Currently not used by symbology; 0

ORIENTATION (ORIENTATION) [SmallInteger;Yes;0;3;0;Pop_Dep] Orientation in whole degrees from East going anti-clockwise;

Currently not used by symbology; 0

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

General - All Scales

Only named inland islands and named islands which form part of the shoreline will be depicted. (See Section 3 6.9.7). The locality point will be placed on land at the approximate centre of the island. Offshore islands will be named as an attribute of the polygon, see Island.

General - All Scales

Where a locality name refers to a wide area the name may appear on a number of overlapping Map Indexes eg 'Murdie Island'. A locality of the same code and name should not be repeated within the same Map Index unless it relates to a number of entities sharing the same name.

Watercourse, Watercourse Area

Section 3 chapters 5.3, 5.11.1, 5.11.2, 5.18, 6.9 and 6.5

GEODATA LITE TOPO100K, GEODATA TOPO250K, NTMS 100K, NTMS 250K