Updated: 1/12/2007

Scales 1:25 000
1:100 000 &
1:250 000

Cleared Line

ClearedLines

Vegetation

Polyline

A graded path in a straight line.

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m)      
Inclusion Length (m) 250 250 2500
Data Capture and
Map Representation
Area (sq m)      
Data Capture and
Map Representation
Length (m) 250 1000 2500

Data Attributes

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Cleared Line

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

99

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

1:25 000

Cleared Lines shown on the latest previous edition map and in the TOPO250K NTDB will be shown, where there is clear evidence they exist. New Cleared lines may be added.

1:100 000

Cleared Lines shown on the latest previous edition map and in the TOPO250K NTDB will be shown, where there is clear evidence they exist. New Cleared lines may be added.

1:250 000

Cleared Lines shown on the TOPO250K NTDB will be retained, where there is clear evidence they exist. New Cleared Lines may be added.

General - All Scales

Cleared lines will be TextNoted e.g 'cleared line'. No reference to seismic lines should be made in the text_note field. If pre-existing features have been identified as seismic lines and are still visible on imagery, they will be redefined as 'cleared line' in the text_note field.

Inter-Feature Relationship Rules - Internal to Associated Dataset


Inter-Feature Relationship Rules - External to Associated Dataset

General - All Scales

Cleared lines cannot overlap;
Sea, Lake, Reservoir, Watercourse Area or Canal Area.

Map Rules

General - All Scales

Cleared lines will be labelled, for example 'cleared line'.

Cleared lines will be masked where black type unavoidably overprints the feature. The break measurement will be 0.2 mm on either side of the type where it crosses the feature. (Note: the feature will be masked only on the map and will be complete in the data.)

Related Features


Related Chapters

Appendix U chapter 2.2.2, 2.5.1

Related Products

GEODATA TOPO250K, NTMS 100K, NTMS 250K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Updated: 1/12/2007

Scales 1:25 000
1:100 000 &
1:250 000

Forest Or Shrub

NativeVegetationAreas

Vegetation

Polygon

An area of land with woody vegetation greater than 10% foliage cover (includes trees and shrubs).

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m) 2500 40000 250000
Inclusion Length (m)      
Data Capture and
Map Representation
Area (sq m) 2500 40000 250000
Data Capture and
Map Representation
Length (m)      

Data Attributes

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Forest Or Shrub

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

1

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

ForestOrShrub

FOLIAGE COVER DENSITY (COVERDENSITY) [String;Yes;10;0;0;Pop_Dep] Density of foliage coverage;

Acceptable Domain Entries from dm_CoverDensity;
Sparse
Dense
Closed

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

2 - All Forest Or Shrub polygons at 250K
201 - Sparse Forest Or Shrub at 25K and 100K
200 - Dense Forest Or Shrub at 25K and 100K
2 - Closed Forest Or Shrub at 25K and 100K

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

1:25 000

The classification of Foliage cover density have the following meanings:
Classification: Meaning
Sparse : Foliage coverage of 10 - 30%
Dense : Foliage coverage of 30 - 70%
Closed : Foliage coverage of 70%+

1:100 000

The classification of Foliage cover density have the following meanings:
Classification: Meaning
Sparse : Foliage coverage of 10 - 30%
Dense : Foliage coverage of 30 - 70%
Closed : Foliage coverage of 70%+

General - All Scales

This classification excludes mangroves, orchards, plantations and rainforest.

Size criteria will not apply where 'Forest Or Shrub' completely covers small islands, i.e. such islands will have a matching 'Forest Or Shrub' polygon.

Fire Scars will be considered as defined holes (areas on universe polygon) within vegetation polygon feature classes. Regrowth of vegetation in these areas will not be anticipated.

Inter-Feature Relationship Rules - Internal to Associated Dataset

1:250 000

Forest Or Shrub cannot overlap;
Other polygons in the Vegetation Dataset.

General - All Scales

Plantations and Rainforest which are under their minimum size criteria, and are adjoined or surrounded by 'Forest Or Shrub' will be reclassified as 'Forest Or Shrub' and merged with its adjoining polygon.

Inter-Feature Relationship Rules - External to Associated Dataset

1:250 000

Forest Or Shrub cannot overlap;
Mine Area, Building Area, Sand Area, Sand Dune, AircraftFacilityArea, Airport Area, Canal Area, Town Rural Storage, Outcrop, Lake perennial, Watercourse Area perennial, and Sea.

A NativeVegetationAreas edge (feature class polygon) must be coincident with the following features if they fall within 50m at 1:250 000 or if the area created between these features and the NativeVegetationAreas edge (feature class polygon) is less than 62 500 sq m at 1:250 000:
Sea Wall
Shoreline
Airport Area edge (feature type polygon)
Building Area edge (feature type polygon)
Built Up Area edge (feature type polygon)
Cemetery Area edge (feature type polygon)
Foreshore Flat edge (feature type polygon)
Landmark Area edge (feature type polygon)
Mine Area edge (feature type polygon)
Rubbish Tip edge (feature type polygon)
AircraftFacilityAreas edge (feature class polygon)
MarineHazardAreas edge (feature class polygon)
RecreationAreas edge (feature class polygon)
Sands edge (feature class polygon)
WaterbodyBoundaries edge (feature class polygon) where they bound Flood Irrigation Storage, Town Rural Storage, Settling ponds, Aquaculture Areas, Salt evaporators, Lakes and Perennial Watercourse areas. (Does Not Include junction or Limit of Data feature types)

General - All Scales

Forest Or Shrub can overlap Built-up area.

Forest Or Shrub cannot overlap;
Building Area (Ruin), Flood Irrigation Storage, Settling Pond, Aquaculture Area, Salt Evaporator.

Map Rules

General - All Scales

Forest Or Shrub will be masked for Built Up Areas on the map

Related Features

Mangrove, Orchard, Plantation, Rainforest, Sand Area, Cleared Line and Windbreak

Related Chapters

Section 2 chapter 2.2.3
Section 3 chapter 5.11.1, 5.11.2, 5.18, 5.19 and 6.3

Related Products

GEODATA TOPO250K, NTMS 100K, NTMS 250K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Updated: 1/12/2007

Scales 1:25 000
1:100 000 &
1:250 000

Mangrove

NativeVegetationAreas

Vegetation

Polygon

A dense growth of mangrove trees, which grow to a uniform height on mud flats in estuarine or salt waters. The land upon which the mangrove is situated is a nearly level tract of land between the low and high water lines.

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m) 3906 3906 390625
Inclusion Length (m)      
Data Capture and
Map Representation
Area (sq m) 3906 62500 390625
Data Capture and
Map Representation
Length (m)      

Data Attributes

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Mangrove

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

2

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Mangrove

FOLIAGE COVER DENSITY (COVERDENSITY) [String;Yes;10;0;0;Pop_Dep] Density of foliage coverage;

This field is not applicable to this subtype and therefore is currently not to be populated;

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

7

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

1:25 000

Size and any other selection criteria apply to all feature occurrences.

1:100 000

Size and any other selection criteria apply to all feature occurrences.

1:250 000

Size and any other selection criteria apply to new feature occurrences. All feature occurrences existing in the TOPO250K NTDB will be retained unless there is clear evidence they no longer exist.

General - All Scales

Mangroves will be revised from the imagery, ortho photography or vegetation revision databases to be supplied.

Size criteria will not apply where mangrove completely covers small islands i.e boundary of island is completely coincident with boundary of mangrove.

Mangrove polygons that form clusters may be combined to form one or more larger polygons if the individual polygons which consitute the cluster are smaller than the minimum size for inclusion, provided this does not misrepresent the true extent/significance of the feature.

Fire Scars will be considered as defined holes (areas on universe polygon) within vegetation polygon feature classes. Regrowth of vegetation in these areas will not be anticipated.

Inter-Feature Relationship Rules - Internal to Associated Dataset

1:250 000

Mangrove cannot overlap;
Windbreaks, Other polygons in the Vegetation Dataset.

Inter-Feature Relationship Rules - External to Associated Dataset

1:25 000

Mangrove cannot overlap;
AircraftFacilityArea polygons, Airport Area, Building Area (Ruin), Cemetery Area, Landmark Area, Rubbish Tip, Flats (Feature Class), Lakes (Non Perennial), Pondage Areas (Feature Class), Flood Irrigation Storage, Watercourse Area (Non Perennial).

1:100 000

Mangrove cannot overlap;
AircraftFacilityArea polygons, Airport Area, Building Area (Ruin), Cemetery Area, Landmark Area, Rubbish Tip, Flats (Feature Class), Lakes (Non Perennial), Pondage Areas (Feature Class), Flood Irrigation Storage, Watercourse Area (Non Perennial).

1:250 000

Mangrove cannot overlap;
AircraftFacilityArea polygons, Airport Area, Sand, Mine area, Sand dunes, Sea, Building Area and polygons in the Waterbodies feature dataset.

A NativeVegetationAreas edge (feature class polygon) must be coincident with the following features if they fall within 50m at 1:250 000 or if the area created between these features and the NativeVegetationAreas edge (feature class polygon) is less than 62 500 sq m at 1:250 000:
Sea Wall
Shoreline
Airport Area edge (feature type polygon)
Building Area edge (feature type polygon)
Built Up Area edge (feature type polygon)
Cemetery Area edge (feature type polygon)
Foreshore Flat edge (feature type polygon)
Landmark Area edge (feature type polygon)
Mine Area edge (feature type polygon)
Rubbish Tip edge (feature type polygon)
AircraftFacilityAreas edge (feature class polygon)
MarineHazardAreas edge (feature class polygon)
RecreationAreas edge (feature class polygon)
Sands edge (feature class polygon)
WaterbodyBoundaries edge (feature class polygon) where they bound Flood Irrigation Storage, Town Rural Storage, Settling ponds, Aquaculture Areas, Salt evaporators, Lakes and Perennial Watercourse areas. (Does not include Junction or Limit of Data feature types)

Map Rules


Related Features

Connector, Forest Or Shrub, Limit of Data, Plantation, Orchard, Forest Or Shrub, Rainforest, Watercourse, Watercourse Area, Shoreline, WaterbodyBoundaries (Feature Class)

Related Chapters

Section 2 chapter 2.2.3
Section 3 chapter 5.11.2, 5.18, 5.19 and 6.3

Related Products

GEODATA TOPO250K, NTMS 100K, NTMS 250K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Updated: 1/12/2007

Scales 1:25 000
1:100 000 &
1:250 000

Orchard

CultivatedAreas

Vegetation

Polygon

An area covered by an orderly planting of trees, vines or bushes which yield fruits, nuts or other edible products.

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m) 3906 3906 390625
Inclusion Length (m)      
Data Capture and
Map Representation
Area (sq m) 3906 62500 390625
Data Capture and
Map Representation
Length (m)      

Data Attributes

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Orchard

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

1

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Orchard

PRODUCT CODE (PRODUCT) [String;Yes;35;0;0;Pop_Dep] Type of product produced or transported;

Acceptable Domain Entries from dm_OrchardProduct;
Apples
Bananas
Citrus
Coffee
Grapes
Olives
Tree Nuts
Other Orchard Type (Unspecified).

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

5

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

1:25 000

Size and any other selection criteria apply to all feature occurrences.

1:100 000

Size and any other selection criteria apply to all feature occurrences.

1:250 000

Size and any other selection criteria apply to new feature occurrences. All feature occurrences existing in the TOPO250K NTDB will be retained unless there is clear evidence they no longer exist.

General - All Scales

Orchard polygons that form clusters may be combined to form one or more larger polygons if the individual polygons which consitute the cluster are smaller than the minimum size for inclusion, provided this does not misrepresent the true extent/significance of the feature.

Fire Scars will be considered as defined holes (areas on universe polygon) within vegetation polygon feature classes. Regrowth of vegetation in these areas will not be anticipated.

Inter-Feature Relationship Rules - Internal to Associated Dataset

1:250 000

Orchard cannot overlap;
Other polygons in the Vegetation Dataset.

Inter-Feature Relationship Rules - External to Associated Dataset

1:25 000

Orchard cannot overlap;
AircraftFacilityAreas, Airport Area, Building Area (Ruin), Rubbish Tip, Flood Irrigation Storage, Lake (Non Perennial), Watercourse Area (Non Perennial), Salt Evaporators, Settling Pond, Aquaculture Area, Cemetery Area, Landmark Area.

1:100 000

Orchard cannot overlap;
AircraftFacilityAreas, Airport Area, Building Area (Ruin), Rubbish Tip, Flood Irrigation Storage, Lake (Non Perennial), Watercourse Area (Non Perennial), Salt Evaporators, Settling Pond, Aquaculture Area, Cemetery Area, Landmark Area.

1:250 000

Orchard cannot overlap;
AircraftFacilityAreas, Airport Area, Built Up Area, Building Area, Sea, Reef, Shoal, Foreshore Flat, Flood Irrigation Storage, Town Rural Storage, Lake, Canal Area, Watercourse Area, Salt Evaporators, Settling Pond, Aquaculture Area, Mine Area, Sand Area, Sand Dunes.

A CultivatedAreas edge (feature class polygon) must be coincident with the following features if they fall within 50m at 1:250 000 or if the area created between these features and the CultivatedAreas edge (feature class polygon) is less than 62 500 sq m at 1:250 000:
Sea Wall
Shoreline
Airport Area edge (feature type polygon)
Building Area edge (feature type polygon)
Built Up Area edge (feature type polygon)
Cemetery Area edge (feature type polygon)
Foreshore Flat edge (feature type polygon)
Landmark Area edge (feature type polygon)
Mine Area edge (feature type polygon)
Rubbish Tip edge (feature type polygon)
AircraftFacilityAreas edge (feature class polygon)
MarineHazardAreas edge (feature class polygon)
RecreationAreas edge (feature class polygon)
Sands edge (feature class polygon)
WaterbodyBoundaries edge (feature class polygon) where they bound Flood Irrigation Storage, Town Rural Storage, Settling ponds, Aquaculture Areas, Salt evaporators, Lakes and Perennial Watercourse areas. (Does Not Include junction or Limit of Data feature types)

Map Rules

1:25 000

Orchards are to have an accompanying descriptive note e.g. 'bananas',' tree nuts',' vineyard', etc if the horticultural type/product is known.

1:100 000

Orchards are to have an accompanying descriptive note e.g. 'bananas',' tree nuts',' vineyard', etc if the horticultural type/product is known.

Related Features

Forest Or Shrub, Plantation,Rainforest, Mangrove

Related Chapters

Section 3 chapter 5.11.1, 5.11.2, 5.18 and 5.19
Appendix U chapter 2.5.2

Related Products

GEODATA TOPO250K, NTMS 100K, NTMS 250K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Updated: 1/12/2007

Scales 1:25 000
1:100 000 &
1:250 000

Plantation

CultivatedAreas

Vegetation

Polygon

Intensively managed stands of trees of either native or exotic species, created by the regular placement of seedlings or seeds.

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m) 3906 3906 390625
Inclusion Length (m)      
Data Capture and
Map Representation
Area (sq m) 3906 62500 390625
Data Capture and
Map Representation
Length (m)      

Data Attributes

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Plantation

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

2

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Plantation

PRODUCT CODE (PRODUCT) [String;Yes;35;0;0;Pop_Dep] Type of product produced or transported;

Acceptable Domain Entries from dm_PlantationProduct;
Softwood
Hardwood

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

6 - All plantations at 250K
6 - Softwood Plantations at 100K and 25K
600 - Hardwood Plantations at 100K and 25K

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

1:25 000

Size and any other selection criteria apply to all feature occurrences.

Plantations are classified using the product field into two types; Softwood plantations which include features such as pine plantations and hardwood plantations which include the eucalyptus species.

1:100 000

Size and any other selection criteria apply to all feature occurrences.

Plantations are classified using the product field into two types; Softwood plantations which include features such as pine plantations and hardwood plantations which include the eucalyptus species.

1:250 000

Size and any other selection criteria apply to new feature occurrences. All feature occurrences existing in the TOPO250K NTDB will be retained unless there is clear evidence they no longer exist.

General - All Scales

Plantation polygons that form clusters may be combined to form one or more larger polygons if the individual polygons which consitute the cluster are smaller than the minimum size for inclusion, provided this does not misrepresent the true extent/significance of the feature.

Fire Scars will be considered as defined holes (areas on universe polygon) within vegetation polygon feature classes. Regrowth of vegetation in these areas will not be anticipated.

When it is clear that a section of plantation has been harvested and no vegetation in that section now exists, that section will be considered as a defined hole (an area on universe polygon) within plantation feature class. Regrowth of the plantation in these areas will not be anticipated.

Inter-Feature Relationship Rules - Internal to Associated Dataset

1:250 000

Plantations cannot overlap;
Other polygons in the Vegetation Dataset.

General - All Scales

Plantations and Rainforest which are under their minimum size criteria, and are adjoined or surrounded by 'Forest Or Shrub' will be reclassified as 'Forest Or Shrub' and merged with its adjoining polygon.

Inter-Feature Relationship Rules - External to Associated Dataset

1:25 000

Plantations cannot overlap;
Lake (Non Perennial), Flood Irrigation Storage, Watercourse Area (Non Perennial), Building Area (Ruin), AircraftFacilityArea, Airport Area, Salt Evaporators, Aquaculture Area and Settling Pond, Rubbish Tip, Landmark Area, Cemetery Area.

1:100 000

Plantations cannot overlap;
Lake (Non Perennial), Flood Irrigation Storage, Watercourse Area (Non Perennial), Building Area (Ruin), AircraftFacilityArea, Airport Area, Salt Evaporators, Aquaculture Area and Settling Pond, Rubbish Tip, Landmark Area, Cemetery Area.

1:250 000

Plantations cannot overlap;
Mine Area, Sand Area, Sand Dune, Lake, Flood Irrigation Storage, Town Rural Storage, Canal Area, Watercourse Area, Building Area, Built Up Area, AircraftFacilityArea, Airport Area, Sea, Salt Evaporators, Aquaculture Area and Settling Pond.

A CultivatedAreas edge (feature class polygon) must be coincident with the following features if they fall within 50m at 1:250 000 or if the area created between these features and the CultivatedAreas edge (feature class polygon) is less than 62 500 sq m at 1:250 000:
Sea Wall
Shoreline
Airport Area edge (feature type polygon)
Building Area edge (feature type polygon)
Built Up Area edge (feature type polygon)
Cemetery Area edge (feature type polygon)
Foreshore Flat edge (feature type polygon)
Landmark Area edge (feature type polygon)
Mine Area edge (feature type polygon)
Rubbish Tip edge (feature type polygon)
AircraftFacilityAreas edge (feature class polygon)
MarineHazardAreas edge (feature class polygon)
RecreationAreas edge (feature class polygon)
Sands edge (feature class polygon)
WaterbodyBoundaries edge (feature class polygon) where they bound Flood Irrigation Storage, Town Rural Storage, Settling ponds, Aquaculture Areas, Salt evaporators, Lakes and Perennial Watercourse areas. (Does not include Junction or Limit of Data feature types)

Map Rules


Related Features

Forest Or Shrub, Orchard, Rainforest, Mangrove

Related Chapters

Section 3 chapter 5.11.1, 5.11.2, 5.18 and 5.19
Appendix U chapter 2.5.2

Related Products

GEODATA TOPO250K, NTMS 100K, NTMS 250K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Updated: 1/12/2007

Scales 1:25 000
1:100 000 &
1:250 000

Rainforest

NativeVegetationAreas

Vegetation

Polygon

Vegetation community which contains key rainforest species, with a foliage cover greater than 70%.

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m) 3906 62500 390625
Inclusion Length (m)      
Data Capture and
Map Representation
Area (sq m) 3906 62500 390625
Data Capture and
Map Representation
Length (m)      

Data Attributes

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Rainforest

SUBTYPE NUMBER (TYPE) [Integer;Yes(No);0;5;0;Pop_Req] The numeric value assigned to sub classify the feature

3

DESCRIPTION OF SUBTYPE (TYPE_DESCRIPTION) [String; No; 32; Pop_Req] The textual description of the subtype classification.

Rainforest

FOLIAGE COVER DENSITY (COVERDENSITY) [String;Yes;10;0;0;Pop_Dep] Density of foliage coverage;

This field is not applicable to this subtype and therefore is currently not to be populated;

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

4

TEXT NOTE (TEXTNOTE) [String;Yes;50;0;0;Pop_Dep] Descriptive note to appear on map. Text Note field should be added when directed in the Geodatabase Rules or if descriptive information is known about a feature that is not covered by any other item in the feature class and expands on the definition of the feature.

DIMENSION (DIMENSION) [Double;Yes;0;15;0;Pop_Dep] This is the dimension of the linear feature in metres or the polygon feature in square metres as measured in the MGA94 projection of the appropriate zone. This field will be populated internally by Geoscience Australia and should not be altered in any form by producers.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

1:25 000

Size and any other selection criteria apply to all feature occurrences.

1:100 000

Size and any other selection criteria apply to all feature occurrences.

1:250 000

Size and any other selection criteria apply to new feature occurrences. All feature occurrences existing in the TOPO250K NTDB will be retained unless there is clear evidence they no longer exist.

General - All Scales

Rainforest polygons that form clusters may be combined to form one or more larger polygons if the individual polygons which consitute the cluster are smaller than the minimum size for inclusion, provided this does not misrepresent the true extent/significance of the feature.

Rainforest should be named where named on base material/digital data or rainforest reference material, the name will be held in the textnote field.

Inter-Feature Relationship Rules - Internal to Associated Dataset

1:250 000

Rainforest cannot overlap;
Other polygons in the Vegetation Dataset.

General - All Scales

Plantations and Rainforest which are under their minimum size criteria, and are adjoined or surrounded by 'Forest Or Shrub' will be reclassified as 'Forest Or Shrub' and merged with its adjoining polygon.

Inter-Feature Relationship Rules - External to Associated Dataset

1:25 000

Rainforest cannot overlap;
Building Area (Ruin), AircraftFacilityArea, Airport Area, Flood Irrigation Storage, Settling Pond, Aquaculture Area, Salt Evaporator, Lake (Non Perennial), Rubbish Tip, Landmark Area, Cemetery Area.

1:100 000

Rainforest cannot overlap;
Building Area (Ruin), AircraftFacilityArea, Airport Area, Flood Irrigation Storage, Settling Pond, Aquaculture Area, Salt Evaporator, Lake (Non Perennial), Rubbish Tip, Landmark Area, Cemetery Area.

1:250 000

Rainforest cannot overlap;
Mine Area, Building Area, Built Up Area, Sand Area, Sand Dune, AircraftFacilityArea, Airport Area, Flood Irrigation Storage, Town Rural Storage, Settling Pond, Aquaculture Area, Salt Evaporator, Lake, Watercourse Area perennial, Canal Area or Sea.

A NativeVegetationAreas edge (feature class polygon) must be coincident with the following features if they fall within 50m at 1:250 000 or if the area created between these features and the NativeVegetationAreas edge (feature class polygon) is less than 62 500 sq m at 1:250 000:
Sea Wall
Shoreline
Airport Area edge (feature type polygon)
Building Area edge (feature type polygon)
Built Up Area edge (feature type polygon)
Cemetery Area edge (feature type polygon)
Foreshore Flat edge (feature type polygon)
Landmark Area edge (feature type polygon)
Mine Area edge (feature type polygon)
Rubbish Tip edge (feature type polygon)
AircraftFacilityAreas edge (feature class polygon)
MarineHazardAreas edge (feature class polygon)
RecreationAreas edge (feature class polygon)
Sands edge (feature class polygon)
WaterbodyBoundaries edge (feature class polygon) where they bound Flood Irrigation Storage, Town Rural Storage, Settling ponds, Aquaculture Areas, Salt evaporators, Lakes and Perennial Watercourse areas. (Does Not Include junction or Limit of Data feature types)

Map Rules

General - All Scales

Rainforest should be named where named on base material/digital data or rainforest revision source material. Type styles for named areas of rainforest will be those used for Vegetation features, see Section 2 chapter 8.4 (for 1:250 000) and 9.4 (for 1:100 000).

Related Features

Forest Or Shrub, Plantation, Orchard, Mangrove, Cleared Line, Windbreak

Related Chapters

Section 2 chapter 2.2.3
Section 3 chapter 5.11.1, 5.11.2, 5.18 and 5.19

Related Products

GEODATA TOPO250K, NTMS 100K, NTMS 250K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Updated: 1/12/2007

Scales 1:25 000 &
1:100 000

Vegetation Anno

VegetationAnno

Vegetation

Annotation

Type associated with the Vegetation Feature Dataset

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m)      
Inclusion Length (m)      
Data Capture and
Map Representation
Area (sq m)      
Data Capture and
Map Representation
Length (m)      

Data Attributes

ANNOTATION CLASS IDENTIFER (ANNOTATIONCLASSID) [Integer;Yes;0;10;0;Pop_Aut] This is the Annotation Class Identifier which is used to define annotation subtypes.

The following annotation classes exist in VegetationAnno;
Arial10ptItalicCenter
Arial12ptItalicCenter
Arial14ptItalicCenter
Arial18ptItalicCenter
Arial6ptItalicCenter
Arial8ptItalicCenter
ArialNarrow6ptItalicCenter
ArialNarrow6ptItalicLeft
ArialNarrow6ptItalicRight

FEATURE (FEATURE) [String;Yes;32;0;0;Pop_Req] The code which identifies the class of topographic feature represented by the annotation. This field must be a legitimate feature class name.

Acceptable Domain Entries from dm_VegetationFCs;
ClearedLines
CultivatedAreas
NativeVegetationAreas
Windbreaks

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

General - All Scales

No feature type field exists for this annotation feature class. The feature type has only been included throughout the specifcation documentation for ease of reference.

Only Annotation associated with, or derived from, entities in feature classes grouped within the Vegetation feature dataset should exist within the VegetationAnno feature class.

Wherever possible annotation should be stored using the subclasses indicated under AnnotationClassID. Annotation stored as inline text should be kept to a minimum.

Type for large polygons and long linear features may be held in an annotation feature for each word to allow for spacing and differences in orientation, see Section 2 chapter 4.

Annotation should not contain any HTML tags within the blob element, nor should it contain any special characters.

Editing and placement of Annotation should be conducted in the appropriate MGA 1994 zone to ensure the spatial position of type on the map face can be correctly represented.

Inter-Feature Relationship Rules - Internal to Associated Dataset


Inter-Feature Relationship Rules - External to Associated Dataset


Map Rules


Related Features


Related Chapters

Section 2 Chapters 5, 9, 10

Related Products

NTMS 100K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Updated: 1/12/2007

Scales 1:25 000
1:100 000 &
1:250 000

Windbreak

Windbreaks

Vegetation

Polyline

A narrow strip of natural or planted trees, or scrub, positioned so as to break the force of the prevailing wind.

Minimum Size Criterion:


Minimum Size for: Criterion 1:25 000 1:100 000 1:250 000
Inclusion Area (sq m)      
Inclusion Length (m) 125 125 1250
Data Capture and
Map Representation
Area (sq m)      
Data Capture and
Map Representation
Length (m) 125 500 1250

Data Attributes

FEATURE TYPE (FEATURETYPE) [String;Yes(No);32;0;0;Pop_Req] The code which identifies the type of topographic feature represented.

Windbreak

FEATURE RELIABILITY DATE (FEATURERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the spatial object; Date to be adjusted only during spatial change or verification of an existing feature location or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Spatial Verification

FEATURE SOURCE (FEATURESOURCE) [String;Yes;50;0;0;Pop_Req] This primary source used to determine the spatial location of a feature.

ATTRIBUTE RELIABILITY DATE (ATTRIBUTERELIABILITY) [Date;Yes;36;0;0;Pop_Req] The reliability date of the attribute object; Date to be adjusted only during attribute change or verification of an existing feature's item values or the capture of a new feature (see Section 1 Chapter 3.6); Most Recent Reliability Date of Revision Source Material (or Base Material/digitial data for inital capture) used for Attribute Verification.

ATTRIBUTE SOURCE (ATTRIBUTESOURCE) [String;Yes;50;0;0;Pop_Req] The primary source used to populate the attribute fields of a feature.

PLANIMETRIC ACCURACY (PLANIMETRICACCURACY) [SmallInteger;Yes(No);0;4;0;Pop_Req] The standard deviation of the horizontal positional accuracy. See Section 1 Chapter 3.7 Positional Accuracy for more information;

REVISED DATE (REVISED) [Date;Yes;36;0;0;Pop_Aut] Date of creation or subsequent revision of the feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

DATA SOURCE (SOURCE) [String;Yes(No);50;0;0;Pop_Req] This is the official name of the agency that originally captured the spatial object for the TOPO250K NTDB; The default value when unknown or not specified in project instructions will be GEOSCIENCE AUSTRALIA.

UNIQUE FEATURE IDENTIFIER (UFI) [String;Yes;10;0;0;Pop_Aut] The unique feature identifier used for the release of Geodata TOPO250K Series 2 product;

FEATURE CREATION DATE (CREATIONDATE) [Date;Yes;36;0;0;Pop_Aut] Date of creation of feature in the database. This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

FEATURE RETIREMENT DATE (RETIREMENTDATE) [Date;Yes;36;0;0;Pop_Aut] Date of retirement of feature in the database.This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

PERSISTENT IDENTIFIER (PID) [Integer;Yes;0;8;0;Pop_Aut] This field will be entered/edited automatically by GEOSCIENCE AUSTRALIA.

UPPER SCALE OF DATA UTILISATION (UPPERSCALE) [Integer;Yes;0;8;0;Pop_Dep] Upper Scale for which the entity should be considered suitable either in its current representation or in a different geometry representation;

Acceptable Domain Entries from dm_UpperScale;
0
25000
50000
100000
250000
1000000
2500000
5000000
10000000

UPPER SCALE CERTAINTY (USCERTAINTY) [String;Yes;10;0;0;Pop_Dep] Classification of upper scale certainity;

Acceptable Domain Entries from dm_USCertainty;
Definite
Indefinite
Undefined

SYMBOL (SYMBOL) [SmallInteger;Yes(No);0;4;0;Pop_Req] (Link to Symbol Dictionary) Symbol number/s applicable;

87

EDIT CODE (EDITCODE) [SmallInteger;Yes;0;2;0;Pop_Dep] A number allowed for ease of symbology of errors or production notes. This code is for production purposes and therefore for producers internal use only and will not be validated.

Geodatabase Rules

1:25 000

Windbreaks shown on the latest previous edition map and its related 'parent' 100K and 250K maps will be shown, unless there is clear evidence they no longer exist. Windbreaks will be added when they can be confirmed on imagery and on additional approved revision source material.

1:100 000

Windbreaks shown on the latest previous edition map and its related 'parent' 250K maps will be shown, unless there is clear evidence they no longer exist. Windbreaks will be added when they can be confirmed on imagery and on additional approved revision source material.

1:250 000

Windbreaks shown on TOPO250K NTDB will be retained, unless there Is clear evidence they no longer exist. No new Windbreaks will be added.

General - All Scales

No distinction will be made between different types of trees. This feature does not include uncleared portions of road reserves or fauna protection corridors regardless of whether or not that feature is represented on the previous edition map or in the data.

Inter-Feature Relationship Rules - Internal to Associated Dataset


Inter-Feature Relationship Rules - External to Associated Dataset

1:250 000

Windbreaks cannot overlap;
Sea, Watercourse Area (Perennial), Lake (Perennial), Canal Area, Reservoir, Building Area, Sand Area, Mine Area or Sand Dune.

General - All Scales

Windbreaks cannot overlap;
Watercourse Area (Non Perennial), Lake (Non Perennial), Building Area (Ruin), Sand Area or Sand Dune.

Map Rules

General - All Scales

Windbreaks will be masked for roads. The break will be the same as the width of the road it crosses.

Related Features

Forest Or Shrub

Related Chapters

Section 3 Chapter 5.3
Appendix U Chapter 2.5.5

Related Products

GEODATA TOPO250K, NTMS 100K, NTMS 250K

Note: See disclaimer in Appendix A Chapter 1.2 Use of Feature Type Dictionary - Structure of an Entry regarding Related features, chapters & products. The information in this entry is uncontrolled when printed.


[back to top]



Unless otherwise noted, all Geoscience Australia material on this website is licensed under the Creative Commons Attribution 3.0 Australia Licence.